The digital LED controller adopts the advanced microcontroller unit, it is used to control a variety of IC LED strip and LED pixel string, you can adjust the brightness, static color choices and different dynamic changes of lighting effects. lighting, although this controller
Mini IC LED controller, easy to install and use
Output voltage: DC5-24V
Static power consumption: <1W
Output Type: TTL/SPI
Control IC quantity: 512pcs
Working temperature: -20 to +60 degrees Celsius
For IC LED module string / IC LED strip etc.
Connection instructions:
Connect LED light signal wire first, usually single IC wire (TM1803/TM1804/TM1809), just connect DAT and GND, double IC wire (LPD6803, SM16716) connect DAT, CLK and GND
Switching power supply “Power +” DC12V positive, power supply “Power +” DC12V negative
Display when power on: P-001 P: represents mode 001: represent mode value, total 36 modes
Setting instructions:
Press the setting in the “IC Mode” state: press “mode +” or “mode”. You can select different ICs that the IC model digital tube can display, capable of being ordered IC model, LPD6803 LPD1109 LPD1882 LPD1886 P9813 SM16716 TM1803 TM1903 TM1829 WS2811 WS2801
Then press the setting again, adjust the IC quantity: press “mode +” or “mode”, add or reduce the IC quantity, watch digital tube: L-001, maximum IC quantity: 512pcs
Press the setting again to save the configuration information, the interface returns to mode selection: P-0xx
Change mode: directly press “mode +” or “mode”, interface display: the corresponding value of P-0XX will increase or decrease
Set the change speed: directly press “mode +” or “mode”, interface show: SP-XXX ,The corresponding value will increase or decrease
Specification:
model: T-500
Material: Metal
Product size: 9.8 x 6.2 x 2.2 cm
Product weight: 84g
Control range: 500 pixels
Supply voltage: 5v-24v
Non-programmable, over 60 animations stored.
