Ultraviolet Sterilization Lamp 36W UV Disinfection Light Ozone Germicidal Lamp Flat Plug
Main feature:
1. Ultraviolet disinfection: This lamp uses double-tube ultraviolet disinfection technology to effectively sterilize and prevent coronavirus. The lamp tube is made of quartz glass with 360° light transmission, which is very effective for disinfection and sterilization.
2. With 3 timing settings: 15 minutes, 30 minutes, 60 minutes, to meet room disinfection in different areas. It can be adjusted manually or remotely. The remote control signal can pass through the wall, which is more convenient to use.
3. Start light disinfection after 10 seconds after setting the timer, people can safely stay away from the lamp body without worrying about radiation. The lamp turns off automatically once disinfection is complete.
4. Leakage design protection, can be used safely. ABS material shell, high temperature and drop resistance.
Note: Ultraviolet rays are harmful to human eyes and skin. Humans and animals must leave the premises during use to ensure safety. Ventilate the space after sterilization to dissipate the odor generated after the bacteria die.
USE
1. on/off
Plug into power outlet, the lamp buzzer will beep (it means connected to power only, the lamp is not in working condition). Press the Power key, the buzzer will beep and the lamp is in standby state; If you press the On/Off key during operation, the buzzer will beep continuously and the lamp will turn off.
2. sync key
You can choose the sterilization time according to specific needs (15 minutes, 30 minutes, 60 minutes), the buzzer will beep for each choice on the timing key. Press the timing key, then press the power key, the lamp starts working with the buzzer beeping twice.
3. working status
The lamp counts down 10 seconds after starting to work, the buzzer beeps every second to alert the person to quickly leave the room. In 10 seconds, the lamp starts to emit UV light and counts the sterilization time. At the end of the sterilization time, the lamp turns off with a beep 10 times to announce the end of sterilization. During the operating period, the lamp will stop working if the infrared sensor detects the presence of a person. When the person leaves, the lamp will start working again until the sterilization time ends.
4. Wireless RF remote control
Using the remote control is the same as using the panel buttons.
REMARKS
1.Do not look directly at the ultraviolet light source, should be used in unmanned circumstances.
2. Make sure the surface of the UV lamp is clean, or it will affect the performance.
3.Keep in dry and clean room. Should extend the exposure time if the ambient temperature is below 20 degrees Celsius or above 40 degrees Celsius.
4.When sterilizing the surface of the object, should directly illuminate within 1m between ultraviolet light and the surface.
5.When sterilizing a pet or pet room, make sure pets do not touch the ultraviolet sterilizer. Please protect pets’ eyes and skin with a shade cloth.
6.Open the window and ventilation for 20-30 minutes after sterilization.
7.When the ultraviolet lamp radiation illuminance is seriously inadequate, please replace the new lamp tube.
